How to install SSD in PS5


With its incredible performance and speed, the PlayStation 5 (PS5) ushers in a new era of gaming, thanks in part to its solid-state drive (SSD) technology. Installing a second SSD is a possible solution for gamers wishing to boost their capacity without compromising speed. This post will walk you through the process of installing an SSD in your PS5, which will improve your gaming setup.

Installation Preparation

Before you begin, make sure you have the following:

  • Compatible SSD: An M.2 NVMe SSD with a PCIe Gen4 interface is required for the PS5. For size and speed requirements, consult Sony’s specs.
  • Heat Dissipation: To manage the thermal load, an SSD heatsink is advised.
  • A Phillips-head screwdriver is required.
  • Data Backup: While not required, backing up your game data to cloud storage or a USB drive is recommended.

Installation Instructions

  • Turn Off Your PS5: Turn your PS5 off entirely and unplug all wires.
  • Remove the PS5 Stand: If you’re using a stand, take it off to have access to the side panels.
  • Open the Side Panel: Place the PS5 so that the PS logo is facing down.
  • To remove the side panel, grasp the bottom left corner, raise slightly, and slide it towards the top side of the console.
  • Remove the Expansion Slot Cover: Using the Phillips-head screwdriver, detach the expansion slot cover (a rectangular, metal cover).

To access the SSD slot, remove the cover.

  • Insert the SSD: Align the SSD with the slot, making that the connection interfaces are compatible.
  • Insert the SSD gently at a modest inclination (approximately 30 degrees).
  • Once in place, use the screw and spacer provided in the expansion slot to secure the SSD.
  • Attach the Heat Sink (if necessary): If your SSD does not come with one, attach one now.
  • When reassembling, make sure the heatsink does not obscure the console.

Reassemble the PS5 as follows:

  • Replace and tighten the expansion slot cover.
  • Slide the side panel back into place with care.
  • Power On Your PS5 After Installation: Reconnect all cords and turn on the console.
  • Format the SSD: You will be prompted to format the new SSD by the PS5. To finish the setup, follow the on-screen directions.
  • Transfer or Install Games: You can now transfer games from internal storage to the SSD or install new ones.

Tips for an Easy Installation

  • ESD Protection: Avoid electrostatic discharge (ESD), which can damage electrical components, by grounding oneself.
  • Follow Sony’s recommendations: Follow Sony’s SSD compatibility criteria to the letter.
  • Handle with Caution: SSDs are delicate. Handle them by the edges and avoid coming into contact with the connectors.


Installing an SSD in your PS5 is a simple technique that improves your gaming experience by increasing storage space while preserving high-speed performance. Following these precise instructions and advice will ensure a successful PS5 upgrade, preparing it for countless hours of gaming delight.

Leave a Reply

Ads Blocker Image Powered by Code Help Pro

Ads Blocker Detected!!!

We have detected that you are using extensions to block ads. Please support us by disabling these ads blocker.

Powered By
100% Free SEO Tools - Tool Kits PRO